5L Battery Double Shaft Planetary Mixer With Touch Screen
Application
Various types of common battery powder and liquid mixing, eventually get a mixed uniform battery slurry. It is suitable for high viscosity process.
Suitable for operating viscosity range ≤ 1.2 million cP
Main parameters
| Model |
TOB-XFZH05 |
| Lower Barrel Parts |
| Design total volume |
8L |
| Elective volume |
2.7-5L |
| Container inner diameter |
240mm |
| Container inside depth |
180mm |
| Container material |
The parts in connect with materials is 304 stainless steel |
| Tempering jacket form |
The bottom and the barrel jacket can input water for cooling, heat preservation and heating |
| Tempering jacket port |
G3/8″，with quick opening movable joint，
jacket withstand pressure≤0.4MPa |
| Tempering jacket circulation system |
prepared by customer，
jacket water inlet temperature≤8℃，
cooling water flow＞3.5L/min |
| Discharge materials form |
bottom of a 1″ Discharge plunger valve |
| Design environment temperature |
-10～+120°C |
| Move mode |
Casters move |
| Mixing Parts |
| Working frequency |
5-50hz |
| Mixing power |
1.5kw |
| Mixing blade speed |
10-98rpm |
| Planetary box rotate speed |
5-50rpm |
| Mixing blade diameter |
124mm |
| Mixing blade model |
Variable cross-section spiral twist type, 90 ° helix |
| Mixing blade material |
304 stainless steel |
| Mixing blade line speed |
0.06-0.6m/s |
| Mixing blade number |
2pcs |
| Distance between blade and blade |
7±2mm |
| Distance between blade and barrel wall |
2+1mm |
| Distance between blade and barrel bottom |
2+1mm |
| Dispersing Parts |
| Working frequency |
5-50hz |
| Dispersing power |
2.2kw |
| Dispersing rotate speed |
610-6100rpm |
| Dispersing plate diameter |
70mm |
| Dispersing model |
Serrated |
| Dispersing plate material |
304 stainless steel |
| Dispersing line speed |
2.2-22m/s |
| Dispersing number |
1pcs |
| Dispersing shaft number |
1pcs |
| Scratch the Wall Parts |
- Scratch wall bracket material：304 stainless steel
- Scratch wall material：Teflon
- Scratch wall rotate speed：Consistent with planetary box rotate speed
- Removable or not：Removable design (Need to remove when scraping the wall on high viscosity process)
|
| Base and Lifting Parts |
- Parts materials：High rigidity structural carbon steel
- Lifting way：electric
- Lifting guide：High-precision linear guide
- Lifting itinerary：≤290mm
|
| Upper Barrel Parts |
- Upper barrel material：304 stainless steel
- Powder feed port： quick opening interface DN50 1pcs
- Liquid feed port：ISO standard 1/2″ quick interface 1pcs
- Mirror port： DN50 tempered glass sight glass 1pcs
- Vacuumize port：G1/2 ” 1pcs
- Exhaust port：together with vacuumize port
- Digital vacuum gauge port：M14×1.5 Internal thread metric tooth interface 1pcs
|
| Control System |
- Electrical cabinet：Used to install low-voltage electrical components such as inverter
- Manual operation panel：For placement buttons, knobs, gauges etc
- Power supply：AC 3×380V±5﹪，50Hz
- Control mode：electronic control
- Power control and speed adjustment mode: Inverter start and control
- Cooling mode：Air-cooled (wind cooling)
- Operation mode：Touch screen
- Digital temperature display gauge：material temperature
- Emergency stop button：1pcs
- Alarm system：Over-temperature alarm, over-temperature alarm shutdown, alarm shutdown
- Speed display: Touch screen shows the speed
- Power instructions: 1pcs
|
| Safety Chain System |
- Emergency stop: press the emergency stop switch, the device immediately stop, and can not do anything
- Start low-speed mixing: can lift the barrel and rotate at the same time
- High-speed dispersion: The barrel cannot be turned until it is in place
- Safe lock in operation: When the machine is running, the mixing barrel can not be lowered, can not open the mixing barrel.
- Prevent vacuum tube backflow: special vacuum buffer tank design, can effectively prevent the vacuum pump oil back to the mixing drum phenomenon
- Stop running fault: Inverter comes with overload, overcurrent, overvoltage, leakage, lack of equal protection
- Mixing barrel lift: stirring barrel in place to rise
- Mixing barrel did not return to normal pressure can not be dropped.
- After mixing barrel rises in place and high-speed dispersion, then can be started.
- After mixing barrel rises in place, with locking protection system, to prevent while the mixing barrel rises to high place abnormal fall.
- Dry mixing stage, while the barrel rising, the stirring paddle need to rotate at the same time.
|
|
Other description |
- Temperature probe：Pt100
- Temperature measurement: Located of the barrel wall to detection of internal material temperature
- Transmission parts bearings：High-speed components for imported bearings, low-speed components for domestic bearings
- Oil seal：Domestic brands，O-ring for Static seal，dynamic seal using mechanical seals or skeleton oil seal
- Grease：Domestic brands
- Mechanical seal lubricants：Imported brand
- Petrol cylinder：Domestic brands
- Petrol station：Domestic brands
- Valve：Domestic brands
- Vacuum design quantity demand：vacuum system prepared by customer own, air exhaust volume 2L/S（2X-2）
- Vacuum hold：-0.098Mpa，holding pressure for 24 hours＞-0.085Mpa，do not leak to the barrel
- Total host power：＞4kw
- Total weight: about 700kg
- Dimensions：L1463mm×W610mm×H1770mm
- Appearance color：off-white
- Ground bearing：900kg/㎡
|
Battery vacuum planetary mixer with touch screen, the volume can be customized, 5L, 10L, 20L, etc.
Double Shaft Mixing Blade
