Max 180*100mm Lithium Pouch Cell Battery Electrode Winder Machine

1. Device function description

This machine is mainly used for precision winding of square lithium ion battery cells. The working process is as follows: manually introduce the cathode and anode electrodes into the winding part, separate from the separator, winding according to the process requirements, automatically attach the termination tape, and automatically discharge the battery.

2. Equipment features

2.1 Double-needle structure

2.2 Manual introduction of electrode, automatic winding, automatic needle changing, automatic end tape and automatic discharging.

2.3 The tape is longitudinally glued (the end tape is parallel to the Tab), the glue is flat, the glue position can be precisely controlled and the battery core is not tightened; the glue is stable and reliable

2.4 Needle winding speed is adjustable

2.5 Two-volume separator active unwinding, encoder speed control technology, high-precision air proportional valve control constant tension, can automatically adjust the tension smoothly during the winding process

2.6 With electrode dust removal device

2.7 Electrode outsourcing or separator outsourcing

2.8 The coiled battery has no damage, core pulling and electrode misalignment

2.9 Easy to operate, easy to adjust and change specifications

3. Specification

3.1 The width for separator: 35-180MM

Needle: 30-60mm, 60-100mm

Electrode width: 33-178mm

3.2 Material specification requirements (unit: mm)

3.3 Ability: 5~8 pcs/min (depending on the width of the needle, the length/width of the electrode)

3.4 Winding accuracy

When ensuring that the electrode meets the following conditions:

The width error of the electrode is less than ±0.2mm

The “S” bending error of the electrode is less than ±1mm/500mm

Separator roll tower shape error is less than ±0.2mm

Winding accuracy can be satisfied：

Separator alignment error is less than ±0.5mm, electrode alignment error is less than ±0.5mm

Can realize anode package cathode, separator package anode , alignment of finished product surface ±0.5

3.5 Pass rate: ≥98% (excluding non-equipment factors)

4. Technical standard

Lithium Pouch Cell Battery Electrode Winder Machine

Factory display