Pneumatic Heat Press Machine For Battery Research

1. Equipment description

The machine has simple structure and easy operation.During operation, first turn on the power of the equipment and let the equipment heat up by itself. After reaching the required temperature, place the material to be pressed flat on the lower pressing plate, set the required pressing time and required cylinder pressure, and use the foot pedal start the operation, the air cylinder moves, the upper pressure plate descends and presses with the lower pressure plate. After the pressing time is up, the upper pressure plate automatically rises, the two pressure plates are separated, and the pressed material is taken out.

2. Description (Specification model)

Dimensions of the pressure plate200mm*200mm

Plate material steel

Working pressure 1 ton

3. Basic equipment

1 ton cylinder

Upper and lower aluminum heating plates

Upper and lower working plate thickness 25MM

Panasonic temperature controller

Omron time relay 0-999.9 seconds adjustable

FOTEK Solid State Relay

Safety light curtain protection

Configuration power supply: AC220V/50HZ Power: 2.0KW

Equipment weight: about 100 KG

4. Technic parameter

The maximum pressure of flat pressing is according to customer needs

Parallelism of upper and lower heating plate ≤0.03mm

Heating temperature and pressure adjustable

Adjustable pressing gap

Temperature control range: indoor temperature ~ 250 ° temperature error: ± 2 °

Equipment size: length560mm*width 350mm * height 970 mm