XIAMEN TOB NEW ENERGY TECHNOLOGY CO.,LTD.
Provide a full set of battery equipment & materials solution.
The battery test cabinet in type TOB-768-3N suitable for lithium ion battery charging requirements.
•Lead time: 20~30days
Main Performance of Equipment
1.Double-sided structure, each battery forming machine can control and detect 768 Ni-MH or Cd-Ni batteries by constant current charging and discharging.
2.A light-emitting diode is installed on each clamp as an over-voltage and under-voltage bypass register display. After discharge, it is used to indicate battery capacity sorting.
3.AVR single-chip computer is used as the control center, which can be controlled by the upper computer or separated from the upper computer to complete constant current charging, discharge testing and capacity sorting.
4.Real-time detection of the charging and discharging voltage of each battery. When charging, the bypass is stored when the voltage exceeds the set upper limit or —△V (preset) occurs, and the corresponding battery indicator lights up. When the discharging voltage is lower than the lower limit set by the user, the bypass is registered and the corresponding battery indicator is lit.
5.Every 8 batteries (in series) have a set of constant current sources, which are sampled by analog switch switching. There are 96 sets of constant current sources in the whole machine. The damage of one group of constant current sources will not affect the normal operation of other channels, modular structure, low failure rate and convenient maintenance.
|Channels per unit||There are 96 groups, 8 channels in each group and 768 channels in the whole machine.|
|Constant current range||0.015~3A, Resolution 1mA|
|Sampling interval||≤8 seconds|
|Current setting accuracy||±（0.1%RD+0.1%FS）|
|Accuracy of current measurement||±（0.1%RD+0.1%FS）|
|Voltage measurement range||0~2V, resolution 1mV|
|Accuracy of voltage measurement||±（0.2%RD+0.1%FS）|
|Voltage range of tested battery||0~1.8V|
|Time range||0-999 minutes/step, accuracy: ±0.1%|
|Dimension||L1720 x W500 x H1840mm|
|Communication mode||RS485, baud rate 57600|
|Supporting battery type||Single Ni-MH battery or Cd-Ni battery|
|Clamp type||Two-wire clamp|
|Supporting battery height||10-80mm, adjustable|
|Distance between clamps||30mm|
|Working power supply||Three-phase four-wire system, AC380V±5%,
|Full load working current||Phase line maximum 7.5A, zero line maximum 15A|
|Start-up current of equipment||The instantaneous closing time of air switch is about 60A|