10L Vacuum Planetary Mixing Machine For Lithium Battery Slurry Preparation

Application

TOB-XFZH10 planetary mixing machine is used for mixing and dispersing powder and liquid of battery, and finally obtaining a uniformly mixed battery slurry, suitable for highly viscous processes.

Suitable for operating viscosity range ≤ 1.2 million cP

Main parameters

1. Design total volume:16L
2. Effective volume: 5-10L
3. Container inner diameter: 310mm
4. Container inside depth: 220mm
5. Container material：the parts in connect with materials is 304stainless steel， can also customized with coated Teflon.
6. Temperingjacket form：button and barrel body through circulating water for cooling, insulation and heating.
7. Temperingjacket port：G1/2″，with quick opening movable joint，jacket withstand pressure≤0.4MPa
8. Temperingjacket circulation system：prepared by customer，jacket water inlet temperature≤8℃，cooling water flow＞7L/min
9. Discharge form：bottom of a G1″three-piece discharge ball valve
10. Design environment temperature：-10～+120°C
11. Move mode：Casters move

Mixing parts

1. Working frequency： 5-50hz
2. Mixing power：2kw one set
3. Mixingrotate speed：10-100 rpm
4. Planetary box speed: 5-50 rpm
5. Mixing blade diameter：161mm
6. Mixing model: Precision casting and Machining of Spiral Mould to ensure 90 °Spiral
7. Mixing plate material：304, can also customized with coated Teflon.
8. Mixing line speed：08-0.8m/s
9. Number of impellers: 2
10. Distance between paddle and paddle: 7.5±2.5 mm
11. Distance between paddle and bucket wall: 3±1.5mm
12. Distance between paddle and bucket bottom: 2.5±1mm

Dispersion parts

1. Working frequency: 5-50hz
2. Dispersing power: 3kw
3. Dispersing rotate speed: 600-6000rpm
4. Dispersing plate diameter: 70mm
5. Dispersing model: Serrated
6. Dispersing plate material: 304 stainless steel, can also customized with coated Teflon.
7. Dispersing line speed : 2.1-21 m/s
8. Dispersing number: 2pcs
9. Dispersing shaft number: 1pcs

Scraping wall parts

1. Scraperbracket material: 304 stainless steel,can also customized with coated Teflon.
2. Scraper platematerial: Teflon
3. Scraperrotate speed：Consistent with planetary box rotate speed
4. Removable or not：Removable design (Need to remove when scraping the wall on high viscosity process)

Base and lifting parts

1. Parts materials：High rigidity structural carbon steel
2. Lifting way：Electric lift
3. Lifting guide：High-precision linear guide
4. Lifting stroke：≤440mm

Upper barrel parts

1. Upper barrel material：304 stainless steel, can also customized with coated Teflon.
2. Power feed port： quick opening interface DN501pcs
3. Liquid feed port：share with powder feed port
4. Mirror port： DN501pcs
5. Vacuumize port: ISO 15A quick 1pcs
6. Exhaust port: ISO 15A quick1pcs
7. Spare port: ISO quick-opening 3/4″, 1pcs
8. Digital vacuum gauge port：M14×1.5 Internal thread metric tooth interface 1pcs

Control system

1. Electrical cabinet：Used to install low-voltage electrical components such as inverter
2. Manual operation panel：For placement buttons, knobs, gauges etc
3. Power supply：AC 3×380V±5﹪，50Hz
4. Control mode：electronic control+hydraulic control
5. Power control and speed adjustment mode: Inverter start and control
6. Cooling mode：Air-cooled and liquid-cooled
7. Operation mode：operate the corresponding button + knob on the cabinet panel
8. Digital temperature display gauge：material temperature
9. Emergency stop button：1pcs
10. Alarm system：Over-temperature alarm, over-temperature alarm shutdown, alarm shutdown
11. Speed display: panel gaugeshows the speed
12. Power instructions: 1pcs

Safety system

1. Emergency stop: press the emergency stop switch, the device immediately stop, and can not do anything
2. Start low-speed mixing: can lift the barrel and turning at the same time
3. High-speed dispersion: barrel up in place before turning
4. Safe lock in operation: When the machine is running, the mixing barrel can not be lowered, can not open the mixing barrel.
5. Prevent vacuum tube backflow: special vacuum buffer tank design, can effectively prevent the vacuum pump oil back to the mixing drum phenomenon
6. Stop running fault: Inverter comes with overload, overcurrent, overvoltage, leakage, lack of equal protection
7. Mixing barrel lift: stirring barrel in place to rise
8. Mixing barrel did not return to normal pressure can not be dropped.
9. After mixing barrel rises in place and high-speed dispersion, then can be started.
10. After mixing barrel rises in place, with locking protection system, to prevent while the mixing barrel rises to high place abnormal fall.
11. Dry mixing stage, while the barrel rising, the stirring paddle need to rotate at the same time.

Other notes

• Temperature probe：Pt100
• Temperature measurement: Dynamic temperature Measurement with synchronous rotation of planetary Box in Bucket, the direct detection of internal material temperature.
• Transmission parts bearings：High-speed components for imported bearings, low-speed components for domestic bearings
• Oil seal：Domestic brands，O-ring for Static seal，dynamic seal using mechanical seals or skeleton oil seal
• Grease：Domestic brands
• Mechanical seal lubricants：Imported brand
• Petrol cylinder：Domestic brands
• Petrol cylinder：Domestic brands
• Valve：Domestic brands
• Vacuum design quantity demand：vacuum system prepared by customer own, air exhaust volume 4L/S（2X-4）
• Vacuum holding：-0.098Mpa，holding pressure for 24 hours＞-0.085Mpa，do not leak to the barrel
• Total host power：＞2kw
• Total weight: about 900kg
• Dimensions：L1530mm×W922mm×H1792mm
• Appearance color：off-white
• Ground bearing capacity: 900kg /㎡

10L battery vacuum planetary mixing machine

TOB-XFZH series is vacuum planetary mixing machine, you can also choose 2L, 5L, 20L mixing volume.

Double Shaft Mixing Blade